What do buzz cut numbers mean

This gives more control for those blurry fades but at-home haircutters should be aware that it changes the length of the combs. Most clipper attachment sets come with guard numbers one through eight. Some models and brands will come with more, some with less. This can be a consideration when purchasing clippers for home use. Some brands even go up to number 10 at 1. All these numbers and guards do have a point. Think of a haircut as different lengths at different places around the scalp. Haircuts follow lines around the head that correspond to bones of the scalp.

Open and closed refer to the taper lever that adjusts blade height but not all clippers have this and the same fade can be done with the guards. A zero fade sounds like it could be a bald fade or skin fade but it is just a little bit longer. This makes it a shadow fade , that goes from short to shorter but not all the way down to the skin. That can be made even shorter with an adjustable blade.

The result is a hint of stubble that leaves a slight shadow instead of a clean shaved look. This short length leaves some space between strands of hair. Before jumping into the world of clippers and clipper guards, make sure to try them out first at your local Hair Mechanix. Also, we can always take more hair off. Stop into your local Hair Mechanix today! Clipper Guard Numbers and What They Mean Knowing the numbers on your clipper guards will make your next cut come out great!

Spread the love. Getting a number 8 haircut all over is just a simple way of keeping your hair neat, even, and manageable. It also makes it easy for you to comfortably apply conditioners and hair gel whenever you want to style your hair. However, Oster users can comfortably make a number 10 haircut due to the availability of this guard size. In terms of length, the number 10 measures 1. Despite being rarely used, these numbers often come in handy for special requests from a select group of clients.

There is a 2-inch 51mm guide comb made by Clipquik or Miaco that fits perfectly onto Wahl clippers. Knowing hair clipper sizes in mm is always important, however, there are other things you should know. Also, the fact that there is a slight difference in the longest hair clipper grades in mm i.

Not all clippers come with the same number of clipper guards. There are numerous third-party clipper guards available today including Remington hair clipper replacement combs.

They are fitted with small, strong magnets that help them to stick on the blade during a haircut. The biggest benefit of using this type of guide combs is that they are easy to attach and detach from the hair clipper ; making it easy for you to quickly switch between haircut lengths men with ease. Basically, these are clipper guards that come in different colors for ease in remembering their size and number.

The Wahl Color Pro is the best example of clippers that come with color-coded guards. As for Remington clippers, only their HC version comes with color-coded attachment combs. Before I wrap up on our haircut clipper guard sizes, there is still one more important aspect to cover. Normally, the Wahl 0 guard is often the most popular size for anyone looking for the shortest hair size using a Wahl clipper.

The package includes 2 home-use clipper blades. Indeed, Andis blade sizes are not as many as the ones you get is an Oster clipper; but as long as they get the job done, all is well, right? Well, this makes the Oster clipper a top choice for barbers looking for extremely precise haircut lengths. Now you know how to make precise haircut sizes, types of guide combs, blade lengths, and what guard numbers actually mean.

I have question that I can not seem to find the answer. I get a number 2 haircut all over. Recently I bought my own Wahl hair clippers that included the clipper guards so I can cut my own hair.

I got confused with the taper lever but found out what it does. My question is, when hair clipper has a number 2 guard, should the taper lever be set to closed or open to get the number 2 haircut all over? I understand when the taper lever is closed it cuts more hair and when open it cuts less hair but how much difference is there in hair length for number 2 between closed and open with number 2 guard and which taper lever position is a true number 2 hair cut with guard?

There are a few things you need to understand about hair clippers — one of them being the function of the taper lever. For example: If you have an Andis hair clipper, opening its taper lever adds between 0. Therefore, if you were to use you 2 guide comb on a clipper with an open taper lever, the resulting haircut length would be longer i.

Basically, opening your taper lever is just the same as using a clipper guard — both are meant to increase the length of the haircut by cutting less hair off. Therefore, when you use both, the resulting hair length will be the sum of the taper lever and clipper guard sizes used.

Not necessarily. In Oster guards, If I use a 0,5mm blade with a 0 1. In case I use a blade with 0 guard will I get an 1. I have a razor from a manufacturer not covered in your article and am unsure if I should change the razor to get longer cuts, or if one of the manufacturers above would fit my razor head. My razor head is 4cm by 3cm so it feels like there might be a universal head for this type of size.

Hey Mike, Thank for you taking the time to make this post. It really cleared up a lot for me. Wahl makes them for animals, but apparently us humans are not allowed to have our own.

When I was in the military one barber I went to had a set of all stainless blade guards. They definitely gave the best haircuts I ever had. I have no idea what brand of clippers he used or even how old they may have been. My plastic combs always seem to get brittle and break over time, but I have never had anyting but cheaper consumer models from places like Walmart. Or should I just be taking better care of my plastic ones? First of all, Thank You for Your Service. However, one thing you should note is that most of the sizes on the available metal guide combs are just the same as the ones we have on the plastic human combs.

So, if you are comfortable using the stainless-steel ones, you can. Ps: If you do happen to come across stainless steel guide combs for men, please share them with us. I was not able to find much more about metal guides, but think I have found what I am looking for.

The barber was probably using detachable blade clippers, and I was thinking it was just metal guides. It is definitely expensive, but I think is exactly what I am looking for. As a quarantined woman I have had to start cutting my own hair with scissors. Not a good job! Is there a clipper that can let me cut my hair two inches all over? A sort of Flowbee contraption? I hope you are doing great and staying safe.

Now, to answer your question. However, there are several third-party guard combs you can use mostly on Wahl clippers to obtain a two-inch haircut. Anyway, I hope this helps. Mike, I have a philips norelco I want a longer cut. My hair has been growing for 3 months now and needs attention while I stay in lockdown. So, if you are keen on getting a 8 or bigger , my suggestion is — get another hair clipper ; preferably, one from a popular brand like Wahl, Andis, or even Oster.

Hi, Barber Mike Your article really gave me a much better understanding of clippers. I have a couple of questions I hope you will answer for me.

Thus, it is unlikely I will be going to a salon even when the pandemic ends. What I have done is to tie my hair in a pony tail and chop it off. Have I applied the facts correctly? How are you holding up? I hope this was helpful Maren. And if you have any other questions, feel free to ask. Thanks for this great article! So I went to the 13mm and it cut way too short. Do you have any advice?

I hope you are doing great. From what I know, there are no 14mm and 15mm Wahl guide combs. The closest you can get to this length range is by using the 4 13mm. Therefore, a hair clipper is highly recommended for this. Fit the 4 guard comb onto your clipper and open the taper lever fully.

So, now you know that this blade and guard combination gives you 16mm and that the guard comb length 13mm is fixed. And since the blades give you a 3mm adjusting range, it means that moving the taper lever a third of the distance it covers from fully-opened to fully-closed should give you about 1mm i.

Therefore, if your taper lever is fully open, all you have to do is to close it by a third of its working distance to get a 15mm-long cut or by two-thirds of the distance to get 14mm of cutting length.

Pro tip: Always start with a longer length and then gradually reduce it to the size you want i. Start with size 16mm, then 15mm, then 14mm… until you achieve your desired length. Anyway, Phil. I hope this is helpful even in the slightest of ways. In case you have any other questions about this, feel free to ask.

Thanks for the helpful article! I have settled on a Wahl 10 and then taper around the ears. The challenge is getting a clean cut with this long attachment. I go back and forth dozens of times, recomb etc and still a little more hair gets cut each pass. I have fairly straight, mostly gray hair with lots of cowlicks.

Do I need better technique, shaver or clip, possibly a clip with more tines or metal, that would better control the hair? This is a bit tricky because of the cowlicks. So, let me walk you through each. My guess is that you are cutting along your hair grains instead of against it. Note: Cutting hair against your natural patterns helps you to cut more hair off easily and more efficiently.

But, on the plus side, this method will ensure you get an exact 10 haircut. On the other hand, cutting along your grain means that your clipper will only cut small amounts of hair per pass, hence, the need to make multiple passes. And if the problem persists, try the other solutions below. Inconsistencies Caused by Cowlicks Your clipping issue could also be as a result of the cowlicks.

I know that they can be stubborn. Most of the standard guards we buy with hair clippers are often made of weak plastic. If this is your case, it means that your guard may be tilting during usage and that can cause the inconsistencies in hair sizes. To fix this, consider getting premium-grade Wahl guide combs and give it a try. Well, there are several blade technologies available today.

If you have curly or soft hair, a standard clipper blade may not be as efficient. I hope this helps you. I hope you are doing great man. So, about the 1 UK guard. However, you should note there may be some differences in how brands number their attachment combs.

But anyway, I hope this helps. In case you find out what they guys meant, please let me know. Great article! Is it possible to use clippers to maintain a medium length cut? Right now it is about 3 inches on the back and sides and about 6 on top. Glad to hear from you. Anyway, to answer your question; the biggest clipper guards you can get online are 2 inches long and from third-party manufacturers like Clipquik and Miaco. There are other ways to maintain that awesome Matt Bomer hairstyle at home.

Here are your options:. So, it will only be useful for maintaining your sides and back. So, advisably, have someone else do this for you. But if you can get your hands on one, it can be of help — for both the sides and top. PS: Watch this video if you have access to a 3D printer.

Maybe this method will give you a better solution. Anyway, I hope this helps you, James. But please get back to me on this in case you find a better way to go about it at home.

Thanks for the excellent article. A lot of the recommended clippers are sold out in Canada.